Are you looking to build a gaming PC on a budget? In this blog post, we will walk you through the process of building your own gaming computer step-by-step. We will provide you with all of the information that you need to make an informed decision about which components to choose for your system. Plus, we’ll give you some tips on how to save money when putting together your new gaming rig!
The only sure-fire way to ensure that your system is capable of satisfying all of your personal preferences is to build a gaming PC from scratch. You know that you’ll be able to play the games you want at the frame rates you want when you determine everything that goes into your PC from the power supply up.
As technology changes, as your gaming tastes and needs change, or as your budget allows, a home-built PC can keep the door open for upgrades.
You might find that building a PC is easier than you think, especially when it is broken into manageable steps. This comprehensive step-by-step guide to building your first gaming PC, complete with tips and tricks from our veteran builders, is what we’ve put together.
PC Build Tools
Gathering the tools you need to complete the build is the first thing you need to prepare for. It’s important to prepare the materials below ahead of time to make sure the build process goes smoothly.
Workspace: You will need a large surface for your work to be done. If you are standing on an uncarpeted surface, you can prevent an accidental discharge.
The magnetic tip of the screwdrivers won’t have any effect on your components, but they will prevent you from dropping screws inside your case.
Gaming PC Cases
If you don’t have a case in mind, you won’t be able to pick out components. The location of the computer is the most important thing to keep in mind when selecting a case. Your PC’s final location will determine how big you can go, and it will also help determine whether various premium case features are worth spending money on. If the computer will be hidden under your desk, you probably don’t want to pay for a side panel made out of glass.
Gaming PC Parts
It’s time for you to get your components together. You can either research each component on your own and create a custom build from scratch, or you can find a pre-made build online and adjust it to suit your specific budget and needs.
Put the board on your work surface after taking it out of its anti-Static packaging. There is a plastic cap on the sockets, which you can find. Take note of where the small arrow is in the corner of the plastic cap on the sockets themselves.
There is a small metal lever next to the processor. To open the sockets tray, press down on the lever and pull it away from the sockets.
Install M.2 Ssds:
It is a good time to install an M.2 storage device. The M.2 slot needs to be found on your computer. There is a small screw across from the horizontal slot. If you can’t find it, if you can’t find multiple M.2 slots, or if you are planning on installing more than one M.2 SSD, you need to consult the user manual that came with your computer.
Install Cpu Cooling:
There are different types of cooling devices. We recommend that you consult the manual that came with your cooler for the exact installation instructions. There are some coolers that need a mounting accessory.
If your cooler doesn’t need a bracket, you’ll need to remove the pre-installed one or replace it if your cooler uses a different one. Before putting the board inside the case, make sure to do this.
Install Memory (Ram)
The number of RAM slots on your computer depends on whether or not you have two or four. Simply snap the RAM into place, if you’re going to fill all of the available slots. If you don’t want to fill all of the RAM slots, you need to consult the user manual to find the correct configuration.
Do A Test Run Outside The Case
You might want to perform a quick test run of your components just to make sure they work after you’ve installed the CPU and the cooler. It is more difficult to perform this test once everything is installed in the system. You have to connect everything to the power supply if you don’t know how to install the graphics card. Plug the power supply into the board and turn it on if you don’t know what you’re doing.
Mount Power Supply
If you are going to do a test run, you should unpack the PSU and set the cables aside. Take a look at your case and figure out where the PSU is supposed to go, and how it should be oriented.
If you want the fan to face outside the case, you should orient the PSU in such a way that it faces away from the case. If your case has a vent on the bottom, you can mount the PSU upside down as long as the bottom vent gets decent air when the PC is finished.
Attach the I/O shield to your case by snapping it into place in the back of the case, make sure it’s oriented correctly. I/O shields have sharp edges, so make sure you watch your fingers.
You should find the x16 slot on your computer. It may be a different color than the others, but it will be the longest slot. If there is more than one x16 slot on your board, you need to check the user manual to see if one slot needs to be prioritized. If any slot can be used, determine which slot you’ll use based on where other components are placed, you want your graphics card to have some breathing room.
You should be able to find a stack of bays in different sizes inside of your case. They may have little plastic switches, in which case they are tool-free bays, or they may just look like metal brackets.
Storage devices are used to keep our most valuable information safe and accessible. HDDs are becoming increasingly popular due to their fast speeds and ability to store a huge amount of data in a small space. However, HDDs are also far more expensive than SSDs.
As such, some people are choosing to go with a hybrid of the two, using an SSD to house your files that are most accessed and frequently changed and then an HDD to keep your more stable data on.
Install Operating System
If you have not prepared your operating system on a flash drive, now is the time to do so.
To turn on your PC, plug in the flash drive that contains your OS, as well as a monitor, mouse, and keyboard, and turn on. You will be told to press a key on the first screen if you want to enter the setup. If the screen flashes off too quickly for you to see the key, you should consult the user’s manual.
These are the simple steps that you need to follow if you want to build a gaming PC. If you are a beginner then I would suggest you go for a mid-range gaming PC. Also, if you are a pro gamer then I would suggest you go for an expensive gaming PC.
We hope that this article helped you gain all the information you needed to know for how to Build a Gaming PC.
Thanks For Reading!